Services · OT and industrial networks
OT and industrial network services for Queensland sites.
The office network and the network that runs the plant are different things. When they share a flat network, a phishing email in the office becomes a path toward the plant. Frontrow maps the line between them, separates the two sides, controls how vendors connect in and plans changes around shutdown windows, from offices in Mackay and Townsville with senior architects from Brisbane.
A recent local example
A June 2026 cyber incident stopped two Mackay mills.
On Wednesday 10 June 2026 a Mackay sugar miller shut two of its three mills. Advocacy group Canegrowers confirmed that the incident had shut down milling and cane haulage at both, which had started crushing within the previous week, and many growers were told to stop harvesting. The miller described it as a cyber security incident affecting operations, and ABC News reported that it shut the mills after finding operating systems had been compromised.
By Friday 12 June the company said it was progressively restoring critical systems and had restarted limited manual crushing at one mill, for cane that had already been harvested. It said it had reported the incident to authorities and anticipated a staged resumption of harvesting and crushing from the following week.
The reports do not say how the incident began, and they do not say whether the affected systems were office IT, plant control systems or both. This page adds nothing to them: every detail above comes from the two ABC News reports linked below.
That open question is where an OT network assessment starts for any site: which systems connect to which, who can reach the plant from outside, and what the business does when one side has to be isolated.
Who it is for
Regional Queensland businesses with a control system behind the office network.
The common thread is a plant or site where a control network sits behind the office network, often supported remotely by an integrator or equipment maker. These are the typical environments.
Mine-site contractors
Maintenance, drilling and services businesses with site compounds and workshops, whose laptops and equipment move between a principal's network and their own.
Processing plants
Plants where the control network sits behind the office network and an integrator or equipment maker supports it remotely.
Mills and seasonal operations
Operations that run hard for a season, where patching and network changes belong in the maintenance period rather than the season.
Water and energy operators
Treatment plants, pump stations and generation sites with telemetry and SCADA links over radio, cellular or satellite.
Workshops with control systems
Fabrication and engineering workshops running CNC machines, test rigs or building controls on the same network as the office.
What Frontrow does
Six pieces of work around one line.
The line is the boundary between the office network and the plant network. Each piece of work either defines it, enforces it or keeps it working while the site runs.
These are the same controls described for resources operators on the mining and resources page, which also covers SOCI support and supplier security questionnaires.
A mapped boundary between office and plant
Frontrow documents where the office network ends and the control environment begins, including every link between them. That map is the baseline the other five pieces of work are measured against.
Segmentation with defined crossings
Frontrow separates the two networks and lets only the traffic the plant needs cross, through a small number of defined, logged paths. A compromised office account then has no direct route to the plant network.
Vendor remote access that is brokered and logged
Equipment maker and integrator access goes through one monitored path with multi-factor authentication and time-bound approval, and every session is logged. Standing connections nobody reviews are retired.
Patching around shutdown windows
Plant systems cannot be patched on an office schedule. Frontrow plans updates and network changes around shutdowns and maintenance windows, so security work does not become an unplanned outage.
Monitoring and an incident path
Detection covers both environments. The incident path is written down for the plant side as well as the office: who is called, who can isolate what, and what the site does while systems are restored.
Site links and remote connectivity
Remote compounds usually run on Starlink or LTE rather than fibre. Frontrow designs the site network around the connection the site actually has, with redundant links and tested failover where production depends on it.
How an assessment runs
An OT network assessment, in four steps.
A scoping conversation
Which sites, which plant systems, who runs them and who supports them remotely. Operations and IT are in the same conversation, because the answers sit in both.
Map the network as it is
Frontrow documents what connects to what: the office network, the plant network, the links between them, the vendor connections and how each site reaches the internet.
Review the boundary and the ways in
Where the two networks meet, who can reach the plant from outside, which vendor connections stay open and how patching is handled today.
Findings and a plan around your shutdowns
Ranked findings in plain English, with the fix for each and whether it can be done while the plant runs or needs a shutdown or maintenance window.
At the end
What the business has when the assessment closes.
Frontrow scopes each assessment to the sites and systems involved after the first conversation.
- A network map showing the office, plant and vendor connections as they are today
- A register of remote-access paths: who can connect, to what, and how each one is approved
- Ranked findings in plain English, each marked as online work or shutdown-window work
- A written incident path for the plant side: who is called and who can isolate what
- A short evidence pack that an assessor, an insurer or a principal's security questionnaire can draw on
FAQ: OT and industrial networks
What site operators ask Frontrow.
- What is OT, and how is it different from the office network?
- OT (operational technology) is the equipment and software that runs a physical process: control systems, SCADA, sensors and the machines a vendor supports remotely. The office network carries email, files and laptops. The office side protects data and the plant side has to keep running, which is why Frontrow keeps them separate and monitors the boundary between them.
- Does the plant have to stop for an assessment?
- No. The assessment is a review of how the site is connected, who can reach it and how it is patched, so it does not need production to stop. Any change that touches production equipment is scheduled around a shutdown or maintenance window and agreed with whoever is accountable for that equipment.
- Can our equipment maker or integrator keep remote access?
- Yes. Frontrow brokers vendor remote access through one monitored path with multi-factor authentication and time-bound approval, and keeps a log of who connected and when. The aim is to replace standing connections nobody reviews, not to cut vendors off.
- Does Frontrow take over our control systems?
- No. Control logic, PLC programs and equipment settings stay with the integrator or equipment maker that owns them. Frontrow works on the network, access and monitoring layer around those systems, alongside the people who run them.
- How does this relate to SOCI and the Essential Eight?
- SOCI obligations sit with the business. Separated networks, controlled vendor access and a documented incident path are technical foundations a risk-management program rests on, and they fit alongside Essential Eight uplift. The mining and resources page covers that wider program.
- Can Frontrow work at remote sites with poor connectivity?
- Yes. Site links are part of the work, built around Starlink, LTE and other cellular or satellite backhaul. Frontrow has offices in Mackay and Townsville, with senior architects joining from Brisbane. Emerald, Moranbah, Dalby, Roma and Mount Isa are serviced remotely with scheduled site trips.
Keep reading
Related Frontrow pages.
- Mining and resources ITThe wider program: SOCI support, supplier questionnaires and remote-site uptime.Open →
- Cyber security and Essential EightHow Frontrow runs the uplift on the Microsoft 365 you already pay for.Open →
- Remote site IT in regional AustraliaWhat works for connectivity, devices and cloud when the site is a long way from the office.Open →
- Supplier security questionnaire checklistWhat principals ask contractors about MFA, backup and incident response.Open →
Talk to Frontrow
Talk to Frontrow about your site network
No call centre and no discovery-call runaround. Send the form and a senior consultant replies the same business day — with an actual view on your situation, not a brochure.
- Prefer to call?
- 1300 012 466
- What happens next
- A reply the same business day, from the person who would actually run the work — not a sales queue.
Book an OT network assessment.
Frontrow walks through your sites, how the office and plant networks connect, who can reach the plant from outside and where patching waits on a shutdown, then hands you a plain-English plan with the work sequenced around your windows.